
![]() |
baupanel eco friendlyExpanded Polystyrene is biologically inert, non-toxic and stable. As a consequence, it does not contribute to gas methane and does not impact any risk for underground water springs. |
![]() |
baupanel recycledIt is 100% RECYCLABLE. During the process of manufacturing baupanel® there is minimal waste. The waste that there is, is directly recycled within the production plant. |
![]() |
baupanel cost savingsBAUPANEL® system means a real advantage for end users as well as for building companies, as it provides many benefits compared to traditional building methods at a much lower price. Undoubtedly, having one element fulfilling two tasks at the same time (a high-resistance wall and thermo-acoustic insulation) is an innovative money saving approach. The financial comparisons between building projects using baupanel® to other traditional building methods show a significant cost saving. |
![]() |
baupanel light-weightThanks to the panels light-weight qualities they are easy to move, transport andinstall. This allows them to be used in most situations. The panel’s light-weight constructionis strengthened once the micro-concrete has been applied, ensuring the BAUPANEL® structure’s strength and integrity. The weight per m2 of the panel before the application of the micro-concrete or mortar depends on the panel type, and ranges from 3.5 kg/m2 to 5 kg/m2. This makes it possible for just one worker to easily move more than 3m2 of panel. |
![]() |
baupanel quick installationOur experience all over the world has shown a real reduction in the building works execution time compared to those with traditional building methods. |
![]() |
baupanel high-load resistanceLaboratory tests carried out internationally have proved the great structural resistance of BAUPANEL®. Loads in normal buildings are distributed across many lineal elements (load walls), whilst the work tension of the concrete is much lower than the maximum allowed for this material. |
![]() |
baupanel thermal insulationThe K value of the total thermal resistance of a BAUPANEL® composed of a 4cm thick EPS (15 kg/m3) density with a 3cm thick micro-concrete on both sides by a total thick of 10cm is 0.78 W/m2 oK. If the wall is made with a panel 8cm thick expanded polystyrene (15 kg/m3 density) the K thermal transmission is 0.49 W/m2 oK. Such levels of thermal insulation far surpass the K values of traditional building walls. This translates into an energy saving of nearly 40%, both for heating and cooling cycles. |
![]() |
baupanel sound insulationThe range of simple panels, with a 3.5cm concrete thickness on each side have an average acoustic insulation of 43.50 dBA. In the case of shared walls and dividing elements between different units of use, we increase the thickness of the walls up to 5.5cm per side (2cm more each side) providing 50,6dBA of acoustic insulation. In cases where walls divide installation or activity rooms, we would apply 55dBA acoustic insulation, according to CTE; it would be necessary to add some sheeting element on the wall to get the required acoustic insulation. |
![]() |
baupanel fire resistantThe EPS used for making the panels is the Euroclass E type (self-extinguishing and it avoids the propagation of flames). Fireproof tests carried out on sheets made with BPR80 panel have proved a resistance of more than > RI 180 minutes. |
![]() |
baupanel seismic resistantLaboratory tests carried out on a two floor BAUPANEL® prototype house (made to scale) have proved that the structure is resistant to loadings higher than the effect of a category 1 earthquake without suffering any kind of damage. These scientific results can be supported as buildings built using our method all over the world have successfully survived strong earthquakes without any damage. |
![]() |
baupanel hurricane resistantBAUPANEL® buildings located in areas with high risk of hurricanes have shown great capacity to resist the most devastating winds. (please see BAUPANEL® website for case studies) |
![]() |
baupanel choice of finishesWalls made with BAUPANEL® can be completed with any kind of finishing. It is possible to directly apply a coating on the discharged micro-concrete or, alternatively, on the shell and core buildings. Traditional paints can be used directly on the panel once concreted. You can apply any finish such as single coat mortar, acrylic mortar, stone sheeting, exposed brick, tiles, etc. In the same way, the inside walls can be finished with plaster or Perlite coating, cardboard-plaster sheeting, tiling, etc... |
Thank you. Your enquiry has been submitted.
"We look forward to talking to you soon."
contact baupanel
For sales, licensing, customer services, training, maintenance and general enquires.
BAUPANEL® London
Bau Panel Systems Limited (Gibraltar)
18b Charles Street
Mayfair
London
W1J 5DU
e: info@baupanel.com
t: +44 (0) 207 499 7200
f: +44 (0) 208 099 2722
BAUPANEL® Spain
Production Facility and Technical Head Office
Avda. Poeta Muñoz Rojas 10B
Pol. Industrial de Antequera
29200 Antequera Málaga Españ
e: info@baupanel.com
t: +34 951 701 414
f: +34 951 700 00
© 2019 baupanel All Rights Reserved.